DirectUpgrades Hardware Verificado
Laptops Solución de Hardware Verificada 5 min de diagnóstico

M.2 NVMe SSD Not Detected in BIOS or Windows Setup: VMD Controller & UEFI Settings

Resolving Intel Rapid Storage Technology (RST) VMD issues and the infamous Windows installation prompt.

Tiempo Estimado ⏱️ 10 - 20 Minutos
Nivel de Dificultad 🎯 Moderado (Cambio de pieza)
Herramientas Necesarias 🛠️ Destornillador de precisión e IPA
Tasa de Éxito ⚡ 98,4% Solución permanente
M.2 NVMe SSD Not Detected in BIOS or Windows Setup: VMD Controller & UEFI Settings
Captura de diagnóstico de hardware 2K Ultra-HD
⚠️

Síntoma del Problema y Causa Raíz

Installed a brand new high-speed NVMe PCIe Gen 4 SSD into your 11th-14th Gen Intel laptop, but the Windows installation screen says "We could not find any drives"? The issue is rarely a hardware defect; it is Intel Volume Management Device (VMD) requiring the IRST storage driver.

Modern laptops with Intel Tiger Lake, Alder Lake, Raptor Lake, and Meteor Lake processors utilize Intel VMD (Volume Management Device) to manage NVMe lanes directly from the CPU. Because standard Windows 10/11 installation media does not contain the latest Intel VMD controller driver, the storage drive appears invisible during OS installation.

1. Two Proven Fixes:

Option A: Load Driver During Windows Setup (Recommended)

  1. Download the Intel RST (VMD) Floppy/F6 driver from your laptop manufacturer (Dell, ASUS, Lenovo, HP).
  2. Extract the driver folder onto your Windows USB installation drive.
  3. On the drive selection screen, click 'Load driver' -> Browse to the VMD folder -> Select 'Intel RST VMD Controller 9A0B'. The SSD will appear instantly!

Option B: Disable VMD in BIOS (Alternative)

  1. Enter BIOS (F2 or Del during startup).
  2. Navigate to 'Advanced' or 'System Configuration'.
  3. Find 'Intel VMD Controller' or 'VMD Technology' and toggle to [Disabled].
  4. Set SATA/NVMe Operation to [AHCI/NVMe]. Save and reboot.

2. Physical Checklist:

Ensure your M.2 SSD is seated fully into the M-key slot and secured with the retention screw without bending the PCB substrate.

✓ Lista de Verificación Final del Técnico

Pasos 100% Seguros
1
Corte de Energía y Descarga Estática Desconecte la alimentación de CA y mantenga presionado el botón de encendido 30s para drenar condensadores.
2
Limpieza de Contactos Eléctricos (IPA 99%) Limpie los pines dorados del chip EEPROM y el hilo de corona con toallitas de alcohol isopropílico al 99%.
3
Restablecimiento de Contadores y Bloqueos Realice la secuencia de restablecimiento (Clear / OK / Engranaje) para borrar avisos del firmware.
✓

Piezas compatibles relacionadas

Piezas oficiales necesarias para una solución definitiva
Samsung 990 PRO 2TB PCIe 4.0 NVMe M.2 SSD
OEM: MZ-V9P2T0B/AM Comprobar precio en Amazon ↗
Kingston KC3000 1TB PCIe 4.0 NVMe SSD
OEM: SKC3000S/1024G Comprobar precio en Amazon ↗
SanDisk Ultra 32GB USB 3.0 Flash Drive for Drivers
OEM: SDCZ48-032G-U46 Comprobar precio en Amazon ↗
← Volver a todas las guías