DirectUpgrades Hardware Verificado
Laptops Solução de Hardware Verificada 5 min de diagnóstico

M.2 NVMe SSD Not Detected in BIOS or Windows Setup: VMD Controller & UEFI Settings

Resolving Intel Rapid Storage Technology (RST) VMD issues and the infamous Windows installation prompt.

Tempo Estimado ⏱️ 10 - 20 Minutos
Nível de Dificuldade 🎯 Moderado (Troca de peça)
Ferramentas Necessárias 🛠️ Chave de fendas de precisão e IPA
Taxa de Sucesso ⚡ 98,4% Solução permanente
M.2 NVMe SSD Not Detected in BIOS or Windows Setup: VMD Controller & UEFI Settings
Captura de diagnóstico de hardware 2K Ultra-HD
⚠️

Sintoma do Problema e Causa Raiz

Installed a brand new high-speed NVMe PCIe Gen 4 SSD into your 11th-14th Gen Intel laptop, but the Windows installation screen says "We could not find any drives"? The issue is rarely a hardware defect; it is Intel Volume Management Device (VMD) requiring the IRST storage driver.

Modern laptops with Intel Tiger Lake, Alder Lake, Raptor Lake, and Meteor Lake processors utilize Intel VMD (Volume Management Device) to manage NVMe lanes directly from the CPU. Because standard Windows 10/11 installation media does not contain the latest Intel VMD controller driver, the storage drive appears invisible during OS installation.

1. Two Proven Fixes:

Option A: Load Driver During Windows Setup (Recommended)

  1. Download the Intel RST (VMD) Floppy/F6 driver from your laptop manufacturer (Dell, ASUS, Lenovo, HP).
  2. Extract the driver folder onto your Windows USB installation drive.
  3. On the drive selection screen, click 'Load driver' -> Browse to the VMD folder -> Select 'Intel RST VMD Controller 9A0B'. The SSD will appear instantly!

Option B: Disable VMD in BIOS (Alternative)

  1. Enter BIOS (F2 or Del during startup).
  2. Navigate to 'Advanced' or 'System Configuration'.
  3. Find 'Intel VMD Controller' or 'VMD Technology' and toggle to [Disabled].
  4. Set SATA/NVMe Operation to [AHCI/NVMe]. Save and reboot.

2. Physical Checklist:

Ensure your M.2 SSD is seated fully into the M-key slot and secured with the retention screw without bending the PCB substrate.

✓ Lista de Verificação Final do Técnico

Passos 100% Seguros
1
Corte de Energia e Descarga Estática Desligue totalmente o cabo de alimentação e mantenha o botão ligar/desligar premido 30s para descarregar os condensadores.
2
Limpeza de Contactos Elétricos (IPA 99%) Limpe os pinos dourados do chip EEPROM e as guias do fio corona com álcool isopropílico 99% sem fiapos.
3
Reposição de Contadores e Bloqueios Execute o procedimento de reposição (Clear / OK) para limpar os avisos de substituição no firmware.
✓

Peças compatíveis relacionadas

Peças oficiais necessárias para resolução definitiva
Samsung 990 PRO 2TB PCIe 4.0 NVMe M.2 SSD
OEM: MZ-V9P2T0B/AM Verificar preço na Amazon ↗
Kingston KC3000 1TB PCIe 4.0 NVMe SSD
OEM: SKC3000S/1024G Verificar preço na Amazon ↗
SanDisk Ultra 32GB USB 3.0 Flash Drive for Drivers
OEM: SDCZ48-032G-U46 Verificar preço na Amazon ↗
← Voltar a todos os guias